Replenishment
Everything under its reorder point, with whatever is already on the water taken off. Tick the lines and raise them — one draft purchase order per supplier, in that supplier's own currency.
Under reorder
71
codes across 7 suppliers
Already covered
12
enough on the water to clear the gap
Still to order
59
$524,192 at ex-works cost
Inbound
3
next lands 14 Aug 2026
$37,175.90
| Code | Description | Free | Reorder at | On the water | Short by | Order | Ex works | Lands | |
|---|---|---|---|---|---|---|---|---|---|
| DCT-CLP-200 | Duct clamp Ø200 with gasket | 24 | 60 | — | 36 | 150 ea | $1,800.00 | 13 Oct 2026 | |
| DCT-TEE-160 | Equal tee Ø160 | -10 | 6 | — | 16 | 16 ea | $688.00 | 13 Oct 2026 | |
| DCT-CAP-315 | End cap Ø315 | -5 | 10 | — | 15 | 25 ea | $825.00 | 13 Oct 2026 | |
| DCT-CAP-630 | End cap Ø630 | -5 | 10 | — | 15 | 25 ea | $2,500.00 | 13 Oct 2026 | |
| DCT-RED-125100 | Reducer Ø125 → Ø100 | -7 | 8 | — | 15 | 20 ea | $480.00 | 13 Oct 2026 | |
| DCT-SS250-1 | Spiral duct Ø250 × 1 m, 304 stainless | -13 | 2 | — | 15 | 15 ea | $525.00 | 13 Oct 2026 | |
| DCT-TEE-125 | Equal tee Ø125 | -8 | 6 | — | 14 | 15 ea | $435.00 | 13 Oct 2026 | |
| GRL-COWL-200 | Weather cowl Ø200, galvanised | -7 | 6 | — | 13 | 15 ea | $1,020.00 | 13 Oct 2026 | |
| DCT-SP125-3 | Spiral duct Ø125 × 3 m, galvanised | -4 | 8 | — | 12 | 20 ea | $260.00 | 13 Oct 2026 | |
| DCT-SS125-1 | Spiral duct Ø125 × 1 m, 304 stainless | -10 | 2 | — | 12 | 12 ea | $132.00 | 13 Oct 2026 | |
| DCT-SSCAP400 | End cap Ø400, 304 stainless | -1 | 6 | — | 7 | 15 ea | $1,837.50 | 13 Oct 2026 | |
| DCT-RECT-500300 | Rectangular duct 500 × 300 × 1.2 m, galvanised | -2 | 4 | — | 6 | 10 ea | $1,120.00 | 13 Oct 2026 | |
| DCT-DMP-315 | Butterfly damper Ø315, hand quadrant | 1 | 6 | — | 5 | 15 ea | $1,935.00 | 13 Oct 2026 | |
| FLT-M5-490592 | M5 panel filter 490 × 592 | 7 | 12 | — | 5 | 30 ea | $2,135.40 | 13 Oct 2026 | |
| DCT-SDL-200 | Saddle take-off Ø200 | 4 | 8 | — | 4 | 20 ea | $820.00 | 13 Oct 2026 | |
| DCT-SSCLP160 | Duct clamp Ø160, stainless with gasket | 9 | 12 | — | 3 | 30 ea | $720.00 | 13 Oct 2026 | |
| DCT-SUPP-KIT | Duct support and hanger kit | 17 | 20 | — | 3 | 50 set | $2,400.00 | 13 Oct 2026 | |
| DCT-BND45-200 | Pressed bend 45° Ø200 | 6 | 8 | — | 2 | 20 ea | $720.00 | 13 Oct 2026 | |
| DCT-RECT-1000500 | Rectangular duct 1000 × 500 × 1.2 m, galvanised | 2 | 4 | — | 2 | 10 ea | $2,100.00 | 13 Oct 2026 | |
| DCT-SDL-100 | Saddle take-off Ø100 | 6 | 8 | — | 2 | 20 ea | $280.00 | 13 Oct 2026 | |
| DCT-SP160-1 | Spiral duct Ø160 × 1 m, galvanised | 6 | 8 | — | 2 | 20 ea | $140.00 | 13 Oct 2026 | |
| DCT-SSCAP125 | End cap Ø125, 304 stainless | 4 | 6 | — | 2 | 15 ea | $300.00 | 13 Oct 2026 | |
| DCT-SSCLP630 | Duct clamp Ø630, stainless with gasket | 10 | 12 | — | 2 | 30 ea | $6,768.00 | 13 Oct 2026 | |
| DCT-DMP-100 | Butterfly damper Ø100, hand quadrant | 5 | 6 | — | 1 | 15 ea | $315.00 | 13 Oct 2026 | |
| DCT-FLG-125 | Flange ring Ø125, drilled | 11 | 12 | — | 1 | 30 ea | $480.00 | 13 Oct 2026 | |
| DCT-SP250-3 | Spiral duct Ø250 × 3 m, galvanised | 15 | 16 | — | 1 | 40 ea | $4,240.00 | 13 Oct 2026 | |
| GRL-BIRD-450 | Bird mesh guard Ø450 | 9 | 10 | — | 1 | 25 ea | $2,200.00 | 13 Oct 2026 |
€162,560.00 EUR ≈ $266,492 ex works
| Code | Description | Free | Reorder at | On the water | Short by | Order | Ex works | Lands | |
|---|---|---|---|---|---|---|---|---|---|
| FE-ARM160-3 | Armotech Ø160 aluminium extraction arm, 3 m | 0 | 6 | — | 6 | 12 ea | €12,960.00 EUR | 10 Dec 2026 | |
| FLT-CART-UNI | Cartridge filter, UNI 2.2/3.2 series | 3 | 8 | — | 5 | 20 ea | €8,400.00 EUR | 10 Dec 2026 | |
| FE-ARM160-2 | Armotech Ø160 aluminium extraction arm, 2 m | 2 | 6 | — | 4 | 12 ea | €11,040.00 EUR | 10 Dec 2026 | |
| FE-ARM200-4 | Armotech Ø200 aluminium extraction arm, 4 m | 0 | 2 | — | 2 | 5 ea | €8,500.00 EUR | 10 Dec 2026 | |
| FE-PMAX15-3 | P-Max welding extraction fan 1.5 kW 3 PH | 1 | 3 | — | 2 | 6 ea | €6,480.00 EUR | 10 Dec 2026 | |
| FE-UNI22-2M-1PH | UNI 2.2 welding fume extractor, 2 m arm, 1PH | -1 | 1 | — | 2 | 3 ea | €13,080.00 EUR | 10 Dec 2026 | |
| FE-UNI22H | UNI 2.2H mobile welding fume extractor, 3 m aluminium arm | 1 | 3 | — | 2 | 6 ea | €23,040.00 EUR | 10 Dec 2026 | |
| FE-UNI32 | UNI 3.2 mobile welding fume extractor, 3 PH | 0 | 2 | — | 2 | 4 ea | €21,680.00 EUR | 10 Dec 2026 | |
| FE-ARM160-4 | Armotech Ø160 aluminium extraction arm, 4 m | 2 | 3 | — | 1 | 6 ea | €7,740.00 EUR | 10 Dec 2026 | |
| FE-ARM160-7 | Armotech Ø160 aluminium extraction arm, 7 m | 1 | 2 | — | 1 | 5 ea | €8,300.00 EUR | 10 Dec 2026 | |
| FE-ARM200-2 | Armotech Ø200 aluminium extraction arm, 2 m | 1 | 2 | — | 1 | 5 ea | €6,800.00 EUR | 10 Dec 2026 | |
| FE-BENCH-1200 | Downdraft bench 1200 × 800 | 0 | 1 | — | 1 | 2 ea | €6,360.00 EUR | 10 Dec 2026 | |
| FE-BENCH-1800 | Downdraft bench 1800 × 900 | 0 | 1 | — | 1 | 2 ea | €8,840.00 EUR | 10 Dec 2026 | |
| FE-EVO32-4M-3PH | EVO 3.2 welding fume extractor, 4 m arm, 3PH | 0 | 1 | — | 1 | 3 ea | €12,240.00 EUR | 10 Dec 2026 | |
| FE-PMAX075-3 | P-Max welding extraction fan 0.75 kW 3 PH | 4 | 5 | — | 1 | 10 ea | €7,100.00 EUR | 10 Dec 2026 |
€100,505.00 EUR ≈ $164,762 ex works
| Code | Description | Free | Reorder at | On the water | Short by | Order | Ex works | Lands | |
|---|---|---|---|---|---|---|---|---|---|
| VE-HOSE-100 | Vehicle exhaust hose Ø100, high temperature | 14 | 40 | — | 26 | 100 m | €4,200.00 EUR | 24 Dec 2026 | |
| VE-BAL-SLID | Sliding hose balancer | -7 | 3 | — | 10 | 10 ea | €2,800.00 EUR | 24 Dec 2026 | |
| VE-HOSE-125 | Vehicle exhaust hose Ø125, high temperature | 33 | 40 | — | 7 | 100 m | €5,400.00 EUR | 24 Dec 2026 | |
| FE-AER201 | AER201 portable fume extractor | -1 | 4 | — | 5 | 8 ea | €15,120.00 EUR | 24 Dec 2026 | |
| VE-APN1 | APN1 wall mounted vehicle exhaust extractor, single, 10 m hose | 0 | 3 | — | 3 | 6 ea | €13,080.00 EUR | 24 Dec 2026 | |
| VE-APN2 | APN2 wall mounted vehicle exhaust extractor, double, 10 m hose | 0 | 2 | — | 2 | 4 ea | €13,680.00 EUR | 24 Dec 2026 | |
| VE-ARHV | ARHV vehicle exhaust hose reel with fan, 10 m hose | 1 | 3 | — | 2 | 6 ea | €16,080.00 EUR | 24 Dec 2026 | |
| VE-ELEMAX-P | Elemax portable vehicle exhaust fume extractor | 1 | 3 | — | 2 | 8 ea | €13,120.00 EUR | 24 Dec 2026 | |
| VE-NOZ-OVALQUAD | Tailpipe nozzle, oval quad | 5 | 6 | — | 1 | 15 ea | €1,950.00 EUR | 24 Dec 2026 | |
| VE-REEL-10 | Exhaust hose reel, 10 m | 0 | 1 | — | 1 | 3 ea | €8,250.00 EUR | 24 Dec 2026 | |
| VE-REEL-5 | Exhaust hose reel, 5 m | 0 | 1 | — | 1 | 3 ea | €6,825.00 EUR | 24 Dec 2026 |
£24,680.00 GBP ≈ $47,462 ex works
| Code | Description | Free | Reorder at | On the water | Short by | Order | Ex works | Lands | |
|---|---|---|---|---|---|---|---|---|---|
| AD-PLENUM | Air knife plenum and manifold set | 0 | 3 | — | 3 | 8 set | £2,720.00 GBP | 17 Dec 2026 | |
| AD-BLOW-22 | ACI regenerative blower 2.2 kW | 0 | 2 | — | 2 | 4 ea | £6,720.00 GBP | 17 Dec 2026 | |
| AD-KNIFE-600 | ACI air knife 600 mm, stainless | 1 | 3 | — | 2 | 8 ea | £7,520.00 GBP | 17 Dec 2026 | |
| AD-BLOW-75 | ACI regenerative blower 7.5 kW | 0 | 1 | — | 1 | 2 ea | £7,720.00 GBP | 17 Dec 2026 |
$8,300.00
| Code | Description | Free | Reorder at | On the water | Short by | Order | Ex works | Lands | |
|---|---|---|---|---|---|---|---|---|---|
| SPR-MOTOR-5P5 | Replacement motor 5.5 kW B14 flange | -5 | 1 | — | 6 | 6 ea | $6,600.00 | 11 Oct 2026 | |
| SPR-MOTOR-075 | Replacement motor 0.75 kW B14 flange | -2 | 2 | — | 4 | 5 ea | $1,700.00 | 11 Oct 2026 |
0 lines ticked.
They will be raised as drafts so the quantities can be checked before anything is sent.
Under reorder, but already covered
Below the line on the shelf, but there is enough on the water to clear it. No action.
| Code | Description | Free | Reorder at | On the water | Lands |
|---|---|---|---|---|---|
| FLT-HEPA-H13 | HEPA H13 secondary filter | -5 | 4 | 78 | PO-216 · 15 Sept 2026 |
| FLT-CART-EVO | Cartridge filter, EVO2.2 | 0 | 8 | 156 | PO-216 · 15 Sept 2026 |
| PC-NOZ-STD | Safety air nozzle, standard | 4 | 12 | 130 | PO-217 · 07 Oct 2026 |
| FE-EVO22 | EVO2.2 compact portable welding fume extractor, 2 m aluminium arm | -1 | 4 | 62 | PO-216 · 15 Sept 2026 |
| FE-HOOD-400 | Hood 400 × 400, galvanised | 0 | 3 | 62 | PO-216 · 15 Sept 2026 |
| FN-TURB-400 | Turbine roof ventilator Ø400, aluminium | 4 | 6 | 15 | PO-222 · 14 Aug 2026 |
| PC-STN-PORT | JetBlack portable personnel cleaning station | 0 | 2 | 17 | PO-217 · 07 Oct 2026 |
| PC-STN-WM | JetBlack wall mounted personnel cleaning station | 0 | 2 | 17 | PO-217 · 07 Oct 2026 |
| FE-ARMW160-3 | Wall mounted flexi-hose extraction arm Ø160 × 3 m | 3 | 4 | 78 | PO-216 · 15 Sept 2026 |
| FN-AX-500 | Aerovent axial flow fan Ø500 | 2 | 3 | 6 | PO-222 · 14 Aug 2026 |
| PC-NOZ-STAINL | Safety air nozzle, stainless | 9 | 10 | 108 | PO-217 · 07 Oct 2026 |
| PC-STN-WALL-2P2 | JetBlack wall mounted personnel cleaning station, 2.2 kW | 0 | 1 | 13 | PO-217 · 07 Oct 2026 |